Resin is one of those mediums we see everywhere, and it’s been on our must-try list for a long time. We’re happy to report that we finally got around to it. We made some fun heart-themed gifts for Valentine’s Day – DIY keychains and DIY resin hair clips. We’re basically obsessed with all the amazing things you can make with resin and epoxy, and hope this is just the beginning of the things we will create. There is somewhat of a learning curve with resin, at least for us, so hopefully this is a helpful tutorial, and you will be crafting with resin in no time.
Kimberly at A Girl and A Glue Gun has so many tips and trick when working with resin and epoxy, and we highly recommend watching her videos. She made some amazing coasters, jewelry and keychains.
DIY Resin Keychains & Hair Clips
Materials:
- Art ‘N Glow Resin – if this doesn’t arrive in time from Amazon, your local Michaels or Joann’s has resin, too
- Heart silicone mold (Walmart for $4)
- Hair clip set
- Keychain accessories or this keychain kit (helpful if you want to make alphabet letters in the future)
- Glitter (just about any glitter or small sequins will work – you can even use dyes, alphabet beads and dried flowers and photographs). We did’t use the dye this time. We have used it before, and it works great)
- Small disposable cups and popsicle sticks
- Disposable table cloth and disposable gloves (very important – it was messy for us)
- Multi-purpose lighter or match
- e-6000 or clear gorilla glue (the other that doesn’t expand)
Directions:
First, we want to apologize for the fact that we don’t have photos of the process. Our hands were wet with resin and didn’t want to mess with a camera at the same time.
Step 1: Follow the directions that come with the resin kit, very carefully. Put on gloves, and set up space with disposable cloth. It’s crucial is have good airflow while stirring and pouring resin. We always have a window open close to the craft table when working with resin. Fresh air is your friend with this one. The first step will be to pour a small (1-2 tbsp or so) amount of resin and hardener in separate cups, then pour an equal amount of each into another cup. The two you pour in together is what you’re going to pour into your project, so estimate the right amount. You will have to stir the two together very slowly for 3-5 minutes. You will see some bubbles – we have found that the slower you stir, the smaller and less bubbles (which is a good thing). Once you are done stirring, pour in another cup, and then add your glitter, a couple drops of dye or whatever you are putting inside. Stir and/or mix it in with a popsicle stick.
Step 2: Pour the resin and add-ins in the molds.
For Hair Clips: You will want to carefully pour to the top of the hair clip molds. If any excess overflows, carefully swipe off with the side of a popsicle stick or wipe with paper towel. You can move any sprinkles or glitter around with a toothpick if you need to.
Hearts: Pour about halfway, not to the top of the mold. If you are adding small alphabet beads, pour a tiny amount of resin in the heart, and then add the beads (you can use a toothpick to help place or wiggle them around), hold a flame close to the top of the resin if any bubbles (they will pop magically), and then pour the rest of the resin to cover the letters The heart should be about 1/2 to 3/4 full.
Step 3: Once the resin is in the mold, you will want to take your lighter and hold it closer to the surface of the resin. We learned this from A Girl and A Glue Gun. It’s amazing – the bubbles pop when the fire gets near it. Carefully hover the lighter over the surface of the resin to get out all bubbles.
Step 4: Wait 24 hours for resin to completely dry/cure. This is super important. It’s hard to do, but you can do hard things! Once 24 hours has passed, push the object through.
Step 5:
Hair Clips: You’re ready to glue the heart resin clip topper onto the actual metal clip. Add e-6000 glue to the metal clip and place the resin topper to the clip. Use chip bag clips to keep the resin in place on the clip. Let dry for at least 2 hours, but 12 is preferable.
Heart keychain: To make this a keychain, you will need the kit mentioned above with the keychain loops, screws and mini drill. Drill a hole smaller than the screw into the top of the letter, so you can twist the eye screw nice and snug in the letter. If you don’t have a drill (like us), you can use a jewelry pliers to twist the eye screw into the letter. It can be frustrating at first, but after a couple twists, it will hold in place, and then you twist further until it’s fully in the letter. Next, add the letter, and you have a darling new keychain.
Speak Your Mind