googly eyes

We’ve got major heart eyes for these DIY eyeball candles. It’s subtle, but an amazing DIY candle upgrade for Halloween. The candle is store-bought, but the DIY eyeballs take less then 30 minutes to add, and the supplies needed are minimal. These are not traditional plastic eyeballs, because that would be a fire hazard…instead, these googly eyes are made from wax.

Once Halloween is over, you can store the candles as-is, or scrape off the eyes, and you have your standard black candles back!

DIY Eyeball Candles for Halloween

Materials:

Soy candle wax, white
Crayon, black
Black taper candles
Heat-safe glass with spout (glass measuring cup works great)
Pot with about 2 cups water on the stove
Bamboo skewer, 2 for each color wax

Directions:

Step 1: Pour about 2 tablespoons candle wax flakes in the glass measuring cup. Set the cup in a pot with water on the stove. Set heat to high and watch it melt. You will not even use it all the wax for these DIY eyeballs, but you can add more if needed. We didn’t use a white crayon with this project because we couldn’t find one. We have 5 of every other crayon, but not white. You can try to use a crayon instead of the soy wax. The black crayon we used for the eyeball was easy to melt and use; however it was somewhat fickle attaching to the white eyeball. By fickle, we mean, the wax had to be very hot and sometimes it would take a second try to stick to the white eyeball (so not THAT fickle). So, we are not sure if this was due to the fact that they are two different kinds of wax, or if the crayons are slightly different to work with.

Step 2: Use the end of the bamboo skewer (the round, flat end, NOT the pointy end) to dab into the hot white wax, and then dab onto the candlestick. You can let the wax cool a bit, so it hardens faster on the candle. As you know a candlestick is round, so if you tilt, the eyeball will be a little deformed. We dabbed a couple drops of wax along one “side” of the candle, and once they turned white and hardened, we would rotate the candle and dab along another edge. The wax takes about 30 seconds to harden, so this is not too time consuming.

Step 3: Once you have all the white eyeballs, now it’s time to melt the black crayon. It’s easier to melt the black crayon if you use a knife to cut it into little shavings. When it’s melted, time to dip the skewer (you can try either end of the skewer, depending on the size of the white eye) and dab gently on each eye. If the black doesn’t attach right away, like we mentioned above, dip it into the melted crayon wax again (make sure it’s hot) and try again. It should work, even if it takes a try or two.

Step 4: Step them in a safe taper candle holder, and watch them glow as Halloween nears. As always, with any kind of candle or candle-related project, please be careful. Don’t ever leave candles unattended, or within close reach of children. Keep flammables away from open flames. Be smart.

Note: This post contains affiliate links. We may make a small commission if you purchase any of the items, at NO extra cost to you. Thanks for supporting our family blog.

Well, we love straws in our drinks, but we never knew we would like them so much for art. We recently blew our way to colorful art with paint and, yes, a straw. Our kids loved this project. It’s fun year-round; on sunny days, and on cold days too, when the kids need to get creative, and off the screens. Since Halloween is around the corner, we made the colorful blown art into cute, adorable monsters. Get those straws out, and those lungs ready to blow.

Blow Art With A Straw

Materials:

Watercolor paper
Crayola washable paint (watered down with drops of water)
Straws (we used paper, but plastic would work, too)
Dropper
Sharpie
Googly Eyes

Directions:

Step 1: Get a paint tray, or tiny cups. Pour about 1/2 tablespoon paint into a cup, along with 1/2 tsp – 1 tsp water. If it’s too watery, the paint will run off the pages too quickly. If it’s too thick, it will not move much at all. Try to find the right consistency that makes drops when placed on paper, and moves well with some wind.

Step 2: Use the dropper to drop “blobs” or dots of paint onto the paper. You can place them wherever you want – some close, some far, some big, some little, etc.

DIY blow art with a straw-googly eye monsters art for kids

Step 3: Now, it’s time to blow. Use the straw to create one-of-a-kind art. As you will discover, the art changes with the direction of the straw and wind. If you blow from the top, it’s a different effect if you blow from the side. We made tiny dots of color, big blended works of art, and medium sized ones, too! It was a lot of fun.