DIY Rocket Popsicle Piñata

rocket-popsicle-red-white-blue-pinata

Jessica’s kids birthdays are close to July 4th, plus we love to celebrate America, so it’s always a really busy time of year and we are in the party mode. This year, we’re celebrating with all things red, white and blue. A party just isn’t a party with young kids without the joy of hitting a piñata. We couldn’t find the perfect (and affordable) red, white and blue piñata, so we made one with the iconic patriotic popsicle in mind. It’s DIY rocket popsicle piñata! It only took a couple hours from start to finish, so you still have time!

Materials:

  • Red, white and blue tissue paper
  • Scissors
  • Pinata, frappuccino shaped
  • Glue stick, or
  • Strips of cardboard
  • Packaging tape

Directions:

Step 1: Remove all existing tissue paper from the pinata. We found a frappuccino shaped piñata at Walmart for less than $15, left the cardboard shape and stripped it of all pink and white tissue paper. Remember to fill the piñata with goodies before you cover it with new fringe.

frappuccino pinata

Step 2: Cut strips of red, white and blue tissue paper.

Step 3: Cut fringe on each strip of tissue paper.

Step 4: With 12 inch strips of cardboard scraps (about 3-4 inches thick), position them from the lid of the piñata frappuccino shape, and angle them up. This is hard to explain, and sorry for our poor photos, but the 4 cardboard scraps will be used to made a little square (or for lack of better words, nipple) on top of the popsicle, to look like the real thing. We used packaging tape to keep it in place. We added the white cardboard tube on the bottom of dry cleaner hangers to create that indention affect along the side of the piñata, but it didn’t really work, so don’t worry about that!

craft with cardboard

Step 5: Starting from the bottom, glue the fringe onto the cardboard. We found it’s best to do two layers of fringe on each layer. You can glue the strips of fringe on top of each other before gluing onto the pinata.

Step 6: Continue layer by layer, blue on the bottom, then white and finally red. Cut a piece of cardboard the shape of a popsicle stick, and with an X-acto knife, cut a slit on the bottom of the popsicle. Insert the cardboard popsicle stick. Hang and have fun!

Enjoy…and then grab a real Rocket popsicle from the freezer to ring in this 4th of July!

IMG_4847

 

talk to us! leave a comment