How to Create DIY Ice Votives for Winter Ambiance

DIY ICE VOTIVES_jsorelle

As I made pasta sauce last week, I was about the throw away the cans of tomato paste and whole, peeled tomatoes, when I thought about their potential for my next project. They lived up to my expectation as the perfect prop to make DIY ice votives. I learned as I went along, and hopefully simplified it for you below so you can warm up the outside of your home this winter. I loved the results, and with the romantic snow falling outside, I wish I had more cans to make more votives! Try it before the snow melts and add it to next year’s winter to-do! Here’s how you can do it flawlessly.

DIY Ice Votives
NOTE: materials below makes 2 ice votives at a time, so multiply materials accordingly, or work on this project over the course of several nights, freezing two votives per day.

You’ll Need:

Water

Rocks

2 28 oz cans, emptied and rinsed

2 14 oz cans, emptied and rinsed

Cold temperature outside, or a freezer

How To:

Fill the large can less than halfway with water.

Fill the small 14 oz cans with rocks.

Place the small can inside the large can – the water should not overflow in the small can, so adjust the water accordingly. The top of the water should be about an inch from the top of the small can.

Move the small can so it’s in the middle of the larger can, with even spaces all around it.

Place the can carefully outside or in the freezer.

In the morning, the water should be frozen.

When It’s Time to Reveal Your Ice Votive

The ice takes about an hour to melt if you want to just let it sit, but who has that kind of time. I don’t, so I just held the cans of frozen water and rocks under the faucet and ran hot water over it for a minute or two. Fill the small can of rocks with hot water so it loosens and ‘releases’ from the ice. Run it across the top of both and you will see it melt.

Once the ice has melted enough to loosen the cans, remove the small can from the large can, and slowly and gingerly tip the large can over slightly so you can gently catch the ice votive.

Find a spot outside on your table, place them on a tray, line them up for a grand entry or make a spot in the snow for your ice votives.

You can fill with either real votive candles {I used real votives}, but it may be better to use flameless candles so the ice doesn’t melt too fast. On a cold week, mine lasted the entire week.

diy ice votives_jsorelle

diy ice votives_jsorelle

winter warmth ice votives

winter diy_ice votives_jsorelle

{images via J. Sorelle}

DIY Twig Cupid’s Arrow on Valentine’s Day

twig cupids arrow
I just couldn’t help myself with this post today – this project was too darn cute not to share. Today, my kids shared their Valentine’s with friends at school and I LOVED what their wonderful, amazing teacher created – twig arrow’s {she also attached pencils to the twigs for each of the kids}. So, I know it’s last-minute with Valentine’s Day being 2 days away, but it’s TOTALLY doable and adorable. Your kids will love to make and their friends will love to receive. Hope you, or someone you love, gets hit by Cupid’s {DIY} arrow this Valentine’s Day.

Thanks, Dee Dee!
diy cupids arrow

All You Need Is:
twigs {free from outside}
felt scraps
scissors
craft glue or hot glue
twine or ribbon to hang a tag

Cut the felt into two triangles for the tip of the arrow. Cut the other felt pieces in the shape of the feathers.
For the tip, place one piece of felt on the bottom, add the twig in the middle of the felt and add some glue around the twig. Press down on the top piece of felt, so it adheres to the bottom piece of felt and keeps the twig tightly in between.
Repeat for the ‘feathers’.
Once the feathers are glued, use a pair of scissors to cut diagonal lines to create the ‘feather’ effect.

diy cupids arrow made by twigs

{project done by Dee Dee, photos via Tutto Bella}

How to Create a Black, White and Gold Glitter Bar

Here’s one of the details from our Sparkle from Head to Toe photo shoot we told you about Fri {the one featured on Hostess with the Mostess}.

We created the perfect party for women to kick off the holiday season and really SHINE. The sparkle party gave women a chance to gossip with friends over cocktails and cookies, try on and shop for jewelry by local artists, and paint their nails at a OPI nail painting station. Women deserve to Sparkle from Head to Toe…and this party let them do just that!

As you know, every good party needs a bar. With a small space, and a tight budget, we created a DIY bar from a tray. It’s a great accessory for any holiday party, bachelorette party, birthday party, or just a night with the ladies. Here’s how you can do it too.

DIY Black and White Striped Bar Tray

You’ll Need
Tray
Paint
Paint brushes
Painters tape
Wood letter from your local WalMart, Hobby Lobby or Michaels
Gold Glitter Spray Paint

How To
Clean and sand the tray if necessary.
Spray paint the whole tray with white primer.
Once primer is dry, paint entire tray white. Repeat once for two coats.
Add Painter’s Tape where you want stripes. My tray had the perfect lines carved into it, so I just lined the tape up with those.
Paint the non-taped parts black. I used a brush to paint for more control, instead of spray paint. Repeat for a total of 2 coats.
After 24 hours, pull the tape from the tray.
If you have any touch ups to do, use a small brush and paint to fix.
For the letters, it’s best to use the primer to spray paint so you don’t see the wood grain under the glitter.
Once the primer is dry, spray paint with glitter spray paint.
Accessorize the bar with champagne, Izze drinks and fresh fruit.

Labels printed and sparkled by FLEUR DE LIS, custom paperie.

{via Tutto Bella}

a merry DIY christmas

You know me – love me some DIY! And, when our list of people to buy for is long, it can get expensive. If your feeling crafty, you still have time to make friends and neighbors gifts made with love. Here’s some great ideas from some very talented folks.

DIY Woodslice Chalkboard, Lisa Leonard Blog
…you can also add your friends monogram on it

Chalkboard Printable for Cute and Cozy Toes All Winter, Tailored Expressions

Sharpie Mug, Life Styled Simply

DIY Chalkboard, Shanty-2-Chic

DIY Acrylic Tray, A Fabulous Fete

DIY doormat, Lisa Leonard Blog

 {images via Tailored ExpressionsLife Styled Simply, Shanty-2-Chic, A Fabulous Fete, Lisa Leonard Blog}

DIY Twig and Branch Snowflakes for a Rustic Holiday

I love all different holiday ‘decor’ styles. Some days I wake up and want everything to be white. Other days, I want gold metallic to glisten the room and every so often, I want colors that are merry and bright. But, I always love a touch of country or mountain rustic.It’s warm and inviting…and reminds me of Christmas in Colorado, especially the mountains of Colorado.

I had a box of twigs and branches in the garage that were just waiting to be sculpted into something…and after a recent shopping trip to Pier 1, I was determined to create DIY snowflakes out of branches, just like their branch snowflake ornaments. It only took about 2 hours, and I saved $14 per snowflake.

You’ll Need:
Thin twigs or branches that can be easily broken with hands {about 20-30}.
Hot glue and glue gun
Red and white twine
Faux greenery and berries {I bought 3 small bunches of greenery for $1 each}

How To:
Find one straight and strong twig for your snowflake ‘base’ {I positioned it vertically on the table}.
Find another twig and ‘eye’ the length as you slant it sightly to the left from your ‘base’. Snap the twig in half, and glue each side to the sides of your ‘base stick’.
Continue to add more sticks around your ‘base’ to complete your snowflake – measure to make sure lengths are really close, snap and glue. You can design it as you like, even adding smaller twigs that branch out from the larger ones.
Once your snowflake is complete, use twine to wrap around each stick in the center, and tie a knot in the back. I did this so it looked more festive, and it covered the hot glue.
Pull apart your faux greenery and glue the pieces onto your snowflake.
You can either use the twine to create a ‘hanger’ to hang these as ornaments, or use Command velcro to adhere to the wall. I only use 4 small pieces of the Command adhesives, and cut them into small squares.

 

{images via Tutto Bella}